|
|
CURRENT
|
| December 2009 Production closure |
Our manufacturing facilities will be closed as of December 24, 2009.
Full production and shipping will resume on Monday January 4, 2010.
The REX Sales Team and Customer Service personnel will be available December 29, 30 & 31 to respond to your inquiries. |
Energy Efficiency Legislation Amendments Effective Jan. 1 2010 (CANADA) |
The Ministry of Natural Resources Canada (NRC) has decided to amend Canada’s energy efficiency regulations to harmonize it with the new DOE efficiency levels for Medium Voltage transformers and make them also effective as of January 1, 2010. The regulations and existing efficiency levels for Low Voltage transformers are not affected by this change.
Starting from September 15, 2009 our responses to requests for quotations for Medium Voltage units likely to be produced and shipped after January 1, 2010 will be quoted as compliant with these revised and more stringent efficiency levels.
Click here to read more…. |
Energy Efficiency Regulation Changes Effective Jan. 1 2020 (USA) |
As you already know The Energy Policy Act of 2005 (EPACT 2005) requires that Low Voltage Dry Type Distribution Transformers (Input Voltage 600 or less) manufactured after January 1, 2007, meet the Class I Efficiency Levels for distribution transformers specified by NEMA TP-1 standards.
The DOE officials also advised in 2006 that efficiency standards for Medium Voltage Dry Type Distribution Transformers (Input voltage of 601 Volts to 34.5 kilovolts) are expected to come into effect around the year 2010. With the DOE Final Rule published Oct.12 2007 these new efficiency levels for Medium Voltage Transformers come into effect on January 1, 2010. The regulations already in effect for Low Voltage Distribution Transformers remain unchanged.
Click here to read more….
The table below summarizes these amended or new regulations and their effect
in Canada and the USA.
| |
IN CANADA |
IN USA |
LOW VOLTAGE
Input Voltage
600 volts or less
Output Voltage
600 volts or less
60HZ |
15 to 833 kVA I phase
15 to 7500kVA III phase
Per C802-00
In effect since Jan 1 2005
As of Jan 1 2010
NO CHANGE |
15 to 833kVA I phase
15 to 2500kVA III phase
Per DOE Final Rule April 27 2006
In effect since Jan 1 2007
As of Jan 1 2010
NO CHANGE |
MEDIUM VOLTAGE
Input Voltage
601 volts to 34.5k volts
Output Voltage
600 volts or less
60HZ |
Same as above
In effect since Jan 1 2005
Amended as of Jan. 1 2010
- Harmonized with US DOE
- Efficiency levels increased
- Up to 7500kVA
Cost increase impact |
NEW
Required as of Jan. 1 2010
Per DOE Final Rule Oct. 12 2007
15 to 833 kVA I phase
15 to 2500kVA III phase
Cost Increase Impact |
Exemption Differences
Tap Ranges
Drive |
No Tap exemptions
Not Exempted |
More than + / - 10%
Exempted |
Other Transformers also exempted:
Auto, Instrument, Machine Tool (control), Rectifier, Converter, Non-ventilated, Sealed, Grounding, Regulator, Special Impedance, Welding, Uninterruptible power supply, underground mining, Testing, Furnace, encapsulated, Not 60 HZ, Drive with more than 2 output windings or over 1500amps, rewound or rebuilt. |
|
| REX recognized by National Research Council |
| The National Research Council of Canada recently published an article recognizing Rex Power Magnetics as an innovator in Energy- Efficient Transformer design. “One company that has made its mark in the ongoing evolution towards greater efficiency is Transfactor Industry's Rex Power Magnetics.” To read more of the article, click here. |
Transformers for Hazardous Locations |
We recently introduced a new line of quality Dry Type Transformers built for Hazardous Locations and Harsh Industrial Environments. For industrial applications where the common Epoxy Encapsulated transformer can be cost prohibitive or may otherwise be in-sufficient, the HLA, HLB & HLC line of Dry Type Transformers are specially engineered for Hazardous Locations and Harsh Industrial Environments. Typical applications include the mining, petrochemical and pulp and paper industries.
Watch for an official brochure and online information about these products coming soon.
For quotations and current pricing information, please contact The REX Sales Team. |
Announcement June 2008
New US Sales Manager |
Please join us in welcoming Bob Cannon of Jenem Sales Inc. as he joins the REX management team as National Sales Manager of the USA. Bob has been very closely associated with us as our Sales Representative in the US North East for over 18 years during which time he has devoted his efforts entirely to the growth of our sales.
With his record of successful growth, knowledge of the industry, extensive background with commercial and industrial markets, Bob is uniquely qualified to lead our sales effort towards continued growth across the United States.
Click here for Bob Cannon's contact information. |
|
|
